Rockford Fosgate Series 1 4060x Manual
If searching for a book Rockford fosgate series 1 4060x manual in pdf format, then you have come on to right site. We furnish the utter edition of this book in doc,.
$110.00 Buy It Now Unsold, FREE Shipping, Seller: (2,494) 99.4%, Location: Phoenix, Arizona, Ships to: US & many other countries, Item: 23 Up for sale is a NICE Rockford Fosgate Series 1 Old School 4 channel amplifier. Amp has been fully tested by a Lead Rockford Fosgate engineer of 24 years and the amp tested perfect!Details: yumpu.com/en/document/view/3603061/series-1-2030-2060x-and-4060x-amplifier-manual Please check my feedback and buy with confidence.Remember Shipping is FREE to the USA!!! Any questions call Evan 602-290-0664 Condition: Used, Brand: Rockford Fosgate, Model: 4060X, MPN: 4060X, Channels: 4, Country/Region of Manufacture: United States See More.
Rockford Fosgate performance in a small package – this Prime Series R500X1D mono amp can drive a sub with up to 500 watts RMS, so you can really feel your bass rockin'. You can use the low-pass filter and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle. A phase switch gets your subs firing along with your other speakers for maximum impact, while the speaker-level inputs let you hook this amp up to almost any system, even a factory stereo. Rockford Fosgate power for your sub Rockford Fosgate performance in a small package – this Prime Series R500X1D mono amp can drive a sub with up to 500 watts RMS, so you can really feel your bass rockin'. You can use the low-pass filter and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle.
A phase switch gets your subs firing along with your other speakers for maximum impact, while the speaker-level inputs let you hook this amp up to almost any system, even a factory stereo. Rugged performance and value The R500X1D's heavy cast aluminum chassis efficiently draws damaging heat away from its internal components, ensuring reliable, long-term play.
The amp's built-in sensors keep track of the output current and power supply temperature, ensuring that plunging subwoofer impedances (they change constantly during play) or even a short circuit won't hurt anything. The included wired remote lets you control the amp's volume level from the front seat.
Rockford Fosgate Series 1 4060x Manual Transmission
Your driver's seat will become your favorite place for listening once this Prime amp goes to work. Putting together a bass system with this amp? Check out these Crutchfield-approved, and bass packages. Features Overview: The Rockford Fosgate Prime R500X1D Class D mono amplifier is designed to power subwoofers.
The Class D design and extruded aluminum heatsink allows the amplifier to run cool and efficiently, and results in a small footprint. CEA 2006 Compliant: The R500X1D's power ratings are measured according to the uniform standards advocated by the Consumer Electronics Association (CEA).
These standards allow you to accurately compare the rated power output and signal to noise ratio of all CEA 2006-compliant amplifiers, even from different brands. Manufacturers who adhere to these standards can display the CEA 2006 logo on their products and packaging. CEA2006 Specifications for this amplifier are:. 4 Ohms: 300 watts RMS x 1 at 4 ohms, 14.4 volts, and less than 1% THD+N.
2 Ohms: 500 watts RMS x 1 at 2 ohms, 14.4 volts, and less than 1% THD+N. S/N: 80 dB, measured at 1 watt output (100 dB measured at rated power) LED Indicator: The amplifier is equipped with an LED power/protect indicator. The LED illuminates blue when the unit is turned on. It illuminates red if the thermal or short circuit protection circuit is engaged, and the amplifier will automatically turn off. Mounting: The amplifier can be mounted vertically or horizontally using the supplied mounting screws. The amplifier should never be mounted in an engine compartment as this will void the warranty. Controls Gain Control: Use the amplifier's gain control to match the output of the source unit.
The rotary gain control is labeled 1 to 11 and has a sensitivity range of 150mV to 4V when using a preamp level signal, 450mV to 12V when using a speaker level signal. Remote Punch Level Control: The R500X1D includes a wired Remote Punch Level Control, linked to the gain control of the amplifier. The module allows you to remotely control the output level of the amplifier from the dash or center console.
The Remote Punch Level Control features a rotary dial, and comes with mounting hardware and an 18' cable. Note: The Remote Punch Level Control measures approximately 1-3/4' wide (2-5/8' including the mounting flange) x 3/4' high x 1-5/8' deep (2-1/8' deep including the knob and wiring). Crossover: The amplifier is equipped with a 12dB/octave Butterworth low-pass crossover. The crossover point is continuously variable from 50 to 250 Hz. This being a subwoofer amp, the crossover is always engaged. Phase: The 2-position phase switch allows you to easily reverse the output phase of the amplifier, choose 0° or 180° to match the rest of your vehicle's speaker system.
Rockford Fosgate Series 1 4060x Manualidades
Punch EQ: The Punch EQ bass boost circuit is adjustable from 0 (min) to +12dB (max) and centered at 45Hz. Connections Power Terminals: The power and ground terminals are nickel-plated set screw terminals and will accommodate up to 4 AWG power and ground wires. (Rockford Fosgate recommends 8 AWG minimum.) Fuse: An external 50-amp fuse (not included) must be installed on the power wire at the battery. If a wiring kit is used which includes a fuse with a value other than 50-amps, the original should be replaced with a 50-amp fuse. When not using a wiring kit, the v6-MANL fuse holder (item number, sold separately) and MANL50 50-amp fuse (item number, sold separately) can be used.
Remote Turn-On Terminal: The remote turn-on terminal is a nickel-plated set screw terminal that will accommodate up to an 8 AWG wire. It's used to remotely turn the amplifier on and off. Speaker Terminals: The one pair of speaker outputs is nickel-plated set screw terminals what will accommodate up to 8 AWG speaker wire.
RCA Input Jacks: The industry standard RCA jacks provide an easy connection for preamp level input. They are nickel-plated to resist signal degradation caused by corrosion. Speaker Level Input: A speaker level input harness is included, making it easier to add the amplifier to a factory radio or to a receiver with no preamp outputs. RCA Output Jacks: A pair of RCA pass-thru jacks provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of your vehicle to the amplifier location. Wired Remote: An RJ-25 jack is used with the included Remote Punch Level Control.
If I remember correctly, the RF R500X1D produces 500 watts at 2 ohms and 250 watts at 4 ohms, so, at 3 ohms it should produce about 375 watts. An amp will push wattage based on the draw of the sub, so there is no adjustment needed to the amp for the 3 ohm resistance. I don't know what the Max. RMS of your JL sub is, but suppose it is 500 watts: it is good practice to power your subs at somewhere between 3/4 and 1 1/2 times the max RMS, so if your sub's max RMS is indeed 500 watts, this amp is about the minimum amount of power necessary to operate it well.
On the opposite end of the spectrum, your sub should have a max RMS rating of at least 250 watts to work with this amp. The R500X1D is a Mono Block amp intended for powering subwoofers only. It has a single channel input for the sub out RCAs from your head unit. It will not take a 100 watt input. I believe this amp will take either a low level input via RCA cables (generally 3 to 5 watts) or Line Level/Speaker Level inputs, which generally run in the 15 to 22 watt range. To use this amp with your factory system, you will need to bypass the factory amp (or remove it). I don't know the make/model of your vehicle, or the particulars of your system, but Crutchfield sells many devices to integrate aftermarket components into a factory system that allow you to keep factory conveniences, such as steering wheel controls and factory system components.
I recommend you call a Crutchfield advisor - they are very friendly and knowledgeable - to determine what you need to do what you want. If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the 'My Orders' tab in the 'My Account' section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: Or try our online support center. Probably not.
First, you would need a high to low level converter to take the separate high level speaker channel output and make it low level signal input (i.e. RCA cables) to the amp. Secondly, without an LOC you will only amplify de-tuned signal from a factory head unit. Thirdly, frequency response is only 20-250Hz, making this amp purpose built to run subwoofers. There's a bunch of assumptions in my response.
Ultimately, yes, you could just use a high to low level converter and get isolated and de-tuned signal through the amp to a set of subs. You will be much better off using an inline LOC though, and more pleased by the sound quality. There's only one amp here, what do you mean by both amps? If you're asking how to connect two of these amps to separate subwoofers, then that will require three fuse blocks (one at the battery, coming off the positive lead.and the other two coming off a fuse block in the vehicle cab). You will also need a distribution block for the ground lead off the vehicle chassis and another one for the positive lead off the battery. Recommend at least 4ga. Or larger power cable off the vehicle battery and (two) 4-8ga.
Power cables off the positive lead distribution block. Those two cables will each need to have a fuse block with a 50 amp rated fuse. Off the battery, I'd recommend around a 150 amp fuse block for the 2 ga. Positive power cable. Of course, positive lead fuse requirements will depend on the addition of any other amplifiers (say a 4-ch.
Amp for door speakers). Hope this helps. If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the 'My Orders' tab in the 'My Account' section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: Or try our online support center.